Carbon Steel Seamless API 5L X52 PSL 2 Pipe
These efforts are relflected in our ability to pass our competitive prices on to you. Our strength in buying can save you money. We bring the largest selection of API 5L carbon steel tube and pipe products to market, including custom structural steel tubing and ASTM pipe products with specialty dimensions. With our immense range of sizes, we are confident we have the products you need.
API 5L X52 PSL 2 Pipe Dimensions Table
Trade Name API 5L X52 PSL 2 Pipe
Other grades api5lx65, api 5l x65, API 5L GR.B PSL 1, API 5L X 42 PSL 1, API 5L X 46 PSL 1, API 5L X 52 PSL 1, API 5L X 56 PSL 1, API 5L X 60 PSL 1, API 5L X 65 PSL 1, API 5L X 70 PSL 1, API 5L GR.B PSL 2, API 5L X42 PSL 2, API 5L X46 PSL 2, API 5L X52 PSL 2, API 5L X56 PSL 2, API 5L X60 PSL 2, API 5L X65 PSL 2, API 5L X70 PSL 2.
Weld Alternatives: ERW, HF, DSAW/LSAW, SMLS, HSAW
OD Size Range:
ERW: 0.375″ through 30″
HF: 0.840″ through 24″
DSAW/LSAW: 12.75″ through 144″
SMLS: 0.840″ through 26″
HSAW: 8.625″ through 144″
Wall Ranges: ERW: 0.120″ through 1.000″
HF: 0.120″ through 1.000″
DSAW/LSAW: 0.250″ through 6.000″
SMLS: 0.250″ through 2.500″
HSAW: 0.250″ through 1.000″
Lengths: Single Random
Double Random
Custom (up to 300′)
Grade: ASTM A53, ASTM A106, ASTM A179, ASTM A192, ST35.8, ST37, ST42, ST52, E235, E355, S235JRH, S275JR, S355JOH, P235TR1, 10#, 20#, 45#, Q235, Q345
Schedule: SCH5 SCH10 SCH20 SCH30 SCH40 SCH80 SCH120 SCH140 SCH160 SCHXS SCHXXS
Surface Finishes: Bare, Oiled, Mill Varnish, Galv, FBE, FBE Dual, 3LPE, 3LPP, Coal Tar, Concrete Coating and Tape Wrap.
End Finishes: Beveled, Square Cut, Threaded & Coupled.
Additional Services: Internal Coating
API 5L X52 (PSL2)
Minimum Yield Strength: 52,200 psi
Maximum Yield Strength: 76,900 psi
Minimum Tensile Strength: 66,700 psi
Maximum Tensile Strength: 110,200 psi
Notes: This is a standard line pipe grade specified in API (American Petroleum Institute) specification 5L.
API 5L X52 Industry Specifications Chemical Composition Yield Strength
min. (KSI) Tensile Strength
min. (KSI) Yield to Tensile
Ratio (max) Elongation
%
ASTM A105, A106, A234, A333, A350, A420, A694,A860 C 0.16
Mn 1.60
Si 0.15-0.50
S 0.007
P 0.025
Cu 0.30
Ni 0.30
Cr 0.25
Mo 0.08
V 0.06
Nb 0.04
Ti 0.02
Sn 0.02
B 0.0005
N 0.014
Al 0.06 max 52